Choosing the Best Paint for a Surface

It’s real that you can most likely paint anything. Should you paint everything with the exact same brush? Offer the surface areas in and around your house new life by picking the best paint, brushes, and methods.


The key to a successfully-painted metal surface is in the prep work.
Before You Paint: Utilize a wire brush to remove the surface. Your aim here is to get rid of rust and flaking. Clean all the dust away with a wet fabric. Use a new, tidy cloth to completely rub the surface down to develop a pristine surface. Sand with 220-grit sandpaper until it’s smooth so you can get a long life out of your paint task. Rinse with water, or wipe down with a damp cloth, and let dry.

The Paint and Process: First, use an exterior-grade guide that is created for metal. It’s smart to do two coats of primer for metal. Once that has actually dried, use an exterior-grade paint formulated for metal with a brush or sprayer. You’ll likely require to do a minimum of two coats.


The methods for painting wood are various, depending on if you’re painting bare or painted wood.
Before You Paint: If you’re working with bare wood, sand with fine sandpaper until the surface is smooth. If the wood is currently painted, use a non-residue cleaner on it.

The Painting and Process: Use a paint brush, instead of a foam brush. For bare wood, utilize a stain-blocking guide initially, and surface with latex or oil-based paint. Sand in between coats if you require to use more than one coat. For painted wood, you’ll also wish to use a stain-blocking primer. Finish with latex paint.

Fiberglass Outside Doors

To do a great job, this takes a little heavy lifting. But the results will deserve it.
Prior to You Paint: Get rid of the door and lay it throughout a set of saw horses. Remove all hardware, and then sand gently with sandpaper. There will be dust, and you can eliminate it with a rag that has been moistened with acetone. Let the door dry, and then wash with a moderate detergent. Let it dry again.
The Paint and Process: First, prime the surface with an acrylic latex guide. Using a brush, apply a coat of exterior-grade latex paint with smooth strokes.

Comments Off on Choosing the Best Paint for a Surface

Filed under My Blog

Comments are closed.